Machinable Fixture Micro™ Clamps
These clamps, with the machinable steel washers, provide more flexibility for holding round or unusual shaped parts. Parts can be held directly to the fixture plate surface. A special screw is provided to hold the washer in the proper location during machining. The flat edge is in the same location as our Micro Clamps and are used where a higher clamping surface is required.
- Low Profile
- Made of mild steel for machinability
- Each package contains one machining screw
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.

CAD Download Link
|
| 1/4-20 | 1/8 | 0.04 | 0.98 | 0.25 | 0.47 | 0.25 | 0.308 | 6.2 | 800 | | |
| 3/8-16 | 3/16 | 0.05 | 1.23 | 0.35 | 0.71 | 0.275 | 0.4 | 20.8 | 2000 | | |
| 1/2-13 | 5/16 | 0.1 | 1.48 | 0.45 | 0.9 | 0.3 | 0.5 | 65 | 4000 | | |
| 5/8-11 | 3/8 | 0.1 | 1.73 | 0.55 | 1.125 | 0.35 | 0.59 | 100 | 6000 | | |
|
| M6 | 4M | 1.01 | 24.9 | 6.4 | 11.9 | 6.4 | 7.8mm | 8.5 | 3358 | | |
| M10 | 7M | 1.52 | 31.2 | 8.9 | 18 | 7 | 10.2mm | 28 | 8900 | | |
| M12 | 8M | 2.03 | 37.6 | 11.4 | 22.9 | 7.6 | 12.7mm | 88 | 17800 | | |
| M16 | 12M | 2.54 | 43.9 | 14 | 28.6 | 8.9 | 15.0mm | 135 | 26700 | | |
G* is the amount of Machinable Stock
H+ is the distance to drill & tap hole from edge of workpiece to use flat face