Shackle-Lok™ Hoist Ring - Inch
Jergens Shackle-Lok™ combines the strength of a hoist ring with the versatility of a shackle. Its unique, 3-piece design is ideal for use with a variety of lift methods, and shackles are interchangeable. Shackle-Lok™ is simply the industry’s most efficient below-the-hook lifting device from a weight-to-load rating ratio.
- Internal ball bearings (440 Stainless Steel) allow for smooth rotation under load
- Full 360° Swivel and 180° Pivot Action
- Easy to remove shackle
- Rated 5:1 Strength Factor in Vertical Pull
- Bolt & Base Material: Alloy Steel 4140; C40-44
- Bolt and Base Finish: Black Oxide
- Bolt and Base are Magnetic Particle Inspected
- Shackle & Shackle Pin: 1035 Carbon Steel; C18-24
- Shackle Finish: Zinc Plated with Gold Colored Conversion Coating
- Proof Tested to 200% of Rated Load Capacity
- Certificate of Proof Test provided
- 3D Solid Models available in multiple formats from www.jergensinc.com
- DOWNLOAD Instruction Sheet
CE Certified
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.

CAD Download Link
|
| | 1/4-20 | 550 | 2.48 | 1.23 | 1/2 | 0.38 | 1/4 | 1.57 | 0.94 | 1.00 | .95 | .34 | .40 | 3 | 0.26 | 0.15 | 5/32 |
| | 5/16-18 | 800 | 2.48 | 1.23 | 1/4 | 0.38 | 1/4 | 1.57 | 0.94 | 1.00 | .95 | .34 | .40 | 5 | 0.26 | 0.15 | 5/32 |
| | 5/16-18 | 800 | 2.48 | 1.23 | 9/16 | 0.38 | 1/4 | 1.57 | 0.94 | 1.00 | .95 | .34 | .40 | 5 | 0.27 | 0.16 | 5/32 |
| | 3/8-16 | 1000 | 2.48 | 1.23 | 9/16 | 0.38 | 1/4 | 1.57 | 0.94 | 1.00 | .95 | .34 | .40 | 7 | 0.27 | 0.16 | 5/32 |
| | 1/2-13 | 2500 | 4.17 | 1.97 | 3/4 | 0.71 | 1/2 | 2.96 | 1.56 | 1.7 | 1.42 | .68 | .74 | 23 | 1.32 | 0.62 | 1/4 |
| | 1/2-13 | 2500 | 4.17 | 1.97 | 1 | 0.71 | 1/2 | 2.96 | 1.56 | 1.7 | 1.42 | .68 | .74 | 23 | 1.34 | 0.63 | 1/4 |
| | 1/2-13 | 2500 | 4.17 | 1.97 | 1 1/16 | 0.71 | 1/2 | 2.96 | 1.56 | 1.7 | 1.42 | .68 | .74 | 23 | 1.34 | 0.64 | 1/4 |
| | 1/2-13 | 2500 | 4.17 | 1.97 | 1 1/4 | 0.71 | 1/2 | 2.96 | 1.56 | 1.7 | 1.42 | .68 | .74 | 23 | 1.35 | 0.65 | 1/4 |
| | 5/8-11 | 4000 | 4.17 | 1.97 | 3/4 | 0.71 | 1/2 | 2.96 | 1.56 | 1.7 | 1.42 | .68 | .74 | 46 | 1.35 | 0.64 | 1/4 |
| | 5/8-11 | 4000 | 4.17 | 1.97 | 1 | 0.71 | 1/2 | 2.96 | 1.56 | 1.7 | 1.42 | .68 | .74 | 46 | 1.37 | 0.66 | 1/4 |
| | 5/8-11 | 4000 | 4.17 | 1.97 | 1 1/4 | 0.71 | 1/2 | 2.96 | 1.56 | 1.7 | 1.42 | .68 | .74 | 46 | 1.39 | 0.69 | 1/4 |
| | 3/4-10 | 5000 | 5.56 | 2.71 | 1 | 0.94 | 5/8 | 3.72 | 2.3 | 2.23 | 2.06 | .79 | .98 | 69 | 3.42 | 1.98 | 3/8 |
| | 3/4-10 | 5000 | 5.56 | 2.71 | 1 1/2 | 0.94 | 5/8 | 3.72 | 2.3 | 2.23 | 2.06 | .79 | .98 | 69 | 3.48 | 2.04 | 3/8 |
| | 7/8-9 | 8000 | 7.25 | 3.52 | 1 | 1.31 | 7/8 | 5.63 | 2.9 | 2.85 | 2.62 | 1.06 | 1.36 | 130 | 7.66 | 3.95 | 7/16 |
| | 7/8-9 | 8000 | 7.25 | 3.52 | 1 1/4 | 1.31 | 7/8 | 5.63 | 2.9 | 2.85 | 2.62 | 1.06 | 1.36 | 130 | 7.7 | 3.99 | 7/16 |
| | 1-8 | 10000 | 7.25 | 3.52 | 1 1/4 | 1.31 | 7/8 | 5.63 | 2.9 | 2.85 | 2.62 | 1.06 | 1.36 | 185 | 7.76 | 4.05 | 7/16 |
| | 1-8 | 10000 | 7.25 | 3.52 | 1 1/2 | 1.31 | 7/8 | 5.63 | 2.9 | 2.85 | 2.62 | 1.06 | 1.36 | 185 | 7.81 | 4.1 | 7/16 |
| | 1-8 | 10000 | 7.25 | 3.52 | 2 1/4 | 1.31 | 7/8 | 5.63 | 2.9 | 2.85 | 2.62 | 1.06 | 1.36 | 185 | 7.98 | 4.27 | 7/16 |
| | 1 1/4-7 | 15000 | 8.25 | 3.99 | 1 7/8 | 1.38 | 1 | 6.08 | 3.06 | 3.3 | 2.94 | 1.18 | 1.61 | 345 | 11.34 | 5.89 | 1/2 |
| | 1 1/2-6 | 24000 | 11.72 | 5.11 | 2 1/4 | 1.88 | 1 1/2 | 8.32 | 4.06 | 5.11 | 3.64 | 1.72 | 2.23 | 660 | 29 | 12.36 | 3/4 |
| | 2-4 1/2 | 30000 | 11.72 | 5.11 | 3 1/8 | 1.88 | 1 1/2 | 8.32 | 4.06 | 5.11 | 3.64 | 1.72 | 2.23 | 1100 | 30.6 | 13.97 | 3/4 |
| | 2 1/2-4 | 50000 | 14.22 | 6.52 | 4 | 2.25 | 1 3/4 | 9.57 | 5.22 | 6.0 | 4.47 | 2.07 | 2.67 | 2300 | 58.7 | 28.95 | 1 |
1 Stated load capacity based on recommended thread torques as shown in chart.
2 It is recommended that these torques be used when installing hoist rings.